AEG S71700TSW0 User Manual download pdf (Page 29)

9.3 Location

100 mm

15 mm 15 mm

The appliance should be installed well

away from sources of heat such as radia-

tors, boilers, direct sunlight etc. Ensure

that air can circulate freely around the

back of the cabinet.To ensure best per-

formance, if the appliance is positioned

below an overhanging wall unit, the mini-

mum distance between the top of the cab-

inet and the wall unit must be at least 100

mm . Ideally, however, the appliance

should not be positioned below overhang-

ing wall units. Accurate levelling is ensured

by one or more adjustable feet at the base

of the cabinet. If the cabinet is placed in a

corner and the side with the hinges facing

the wall, the distance between the wall

and the cabinet must be at least 10 mm to

allow the door to open enough so that the

shelves can be removed.

WARNING!

It must be possible to disconnect

the appliance from the mains pow-

er supply; the plug must therefore

be easily accessible after installa-

tion.

9.4 Installing under a continuous worktop

500/550/600 mm

93-103 mm

105 mm

A

200 cm

2

570 mm

min. 820 mm

550 mm

If your refrigerator is installed under a

continuous worktop, an air outlet open-

ing of at least 200cm

2

and a ventilation

grille matching the worktop design

should be installed at the rear of the

worktop.

The cut surfaces of the worktop should

be varnished to avoid swelling due to

penetration of moisture.

The appliance wall distance must be at

least 30 mm and should be checked be-

fore the ventilation grille is inserted.

ENGLISH 29

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 51 52

Comments to this Manuals

No comments