AEG BP5003001M User Manual download pdf (Page 31)

12. WHAT TO DO IF…

WARNING!

Refer to the Safety chapters.

Problem Possible cause Remedy

The appliance does not

heat up.

The appliance is deacti-

vated.

Activate the appliance.

The appliance does not

heat up.

The clock is not set. Set the clock. Refer to

"Setting the clock".

The appliance does not

heat up.

The necessary settings

are not set.

Make sure that the set-

tings are correct.

The appliance does not

heat up.

The automatic cut-out is

activated.

Refer to “Automatic

switch-off”.

The appliance does not

heat up.

The fuse is released. Make sure that the fuse

is the cause of the mal-

function. If the fuse re-

leases again and again,

contact a qualified elec-

trician.

The lamp does not oper-

ate.

The lamp is defective. Replace the lamp.

The pyrolytic cleaning

does not operate (the

time display shows

“C3”).

You did not fully close

the door, or the door

lock is defective.

Fully close the door.

The display shows

“F102”.

• You did not fully close

the door.

• The door lock is defec-

tive.

• Fully close the door.

• Deactivate the appli-

ance with the house

fuse or the safety

switch in the fuse box

and activate it again.

• If the display shows

“F102” again, contact

the Customer Care

Department.

The display shows an er-

ror code that is not on

this list.

There is an electrical

fault.

• Deactivate the appli-

ance with the house

fuse or the safety

switch in the fuse box

and activate it again.

• If the display shows

the error code again,

contact the Customer

Care Department.

If you cannot find a solution to the prob-

lem yourself, contact your dealer or the

service centre.

The necessary data for the service centre

is on the rating plate. The rating plate is

on the front frame of the appliance cavi-

ty.

ENGLISH 31

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 39 40

Comments to this Manuals

No comments