AEG BE4003001M User Manual download pdf (Page 26)

11.1 What to do if...

Problem Possible cause Remedy

You cannot activate or oper-

ate the oven. The display

shows “400” and an acoustic

signal sounds.

The oven is incorrectly con-

nected to an electrical sup-

ply.

Check if the oven is correctly

connected to the electrical

supply (refer to the connec-

tion diagram if available).

The oven does not heat up. The oven is deactivated. Activate the oven.

The oven does not heat up. The clock is not set. Set the clock.

The oven does not heat up. The necessary settings are

not set.

Make sure that the settings

are correct.

The oven does not heat up. The fuse is blown. Make sure that the fuse is

the cause of the malfunction.

If the fuse is blown again

and again, contact a quali-

fied electrician.

The lamp does not operate. The lamp is defective. Replace the lamp.

Steam and condensation

settle on the food and in the

cavity of the oven.

You left the dish in the oven

for too long.

Do not leave the dishes in

the oven for longer than 15 -

20 minutes after the cooking

process ends.

The display shows "12.00". There was a power cut. Reset the clock.

11.2 Service data

If you cannot find a solution to the

problem yourself, contact your dealer or

an Authorised Service Centre.

The necessary data for the service centre

is on the rating plate. The rating plate is

on the front frame of the appliance

cavity. Do not remove the rating plate

from the appliance cavity.

We recommend that you write the data here:

Model (MOD.) .........................................

Product number (PNC) .........................................

Serial number (S.N.) .........................................

12. ENERGY EFFICIENCY

12.1 Product Fiche and information according to EU 65-66/2014

Supplier's name AEG

www.aeg.com26

1 2 ... 21 22 23 24 25 26 27 28

Comments to this Manuals

No comments

AEG BE4003001M User Manual Page 26

Comments to this Manuals

Related products and manuals for Unknown AEG BE4003001M