AEG T8DEP845E User Manual download pdf (Page 15)

To activate or deactivate an option touch

the relevant button or 2 buttons

combination.

When the option is activated, the LED

above the button or symbol illuminates

on the display.

8.7 Child lock option

The child lock can be set to prevent

children from playing with the appliance.

The child lock option locks all touch

buttons and the program dial (this option

does not lock the On/Off button).

You can activate the child lock option:

• before you touch the Start/Pause

button - the appliance cannot start

• after you touch the Start/Pause

button - programs and option

selection is unavailable.

Child lock option activation:

1.

Turn the dryer on.

2. Select 1 of the available programs.

3. Touch and hold down 2 buttons at

the same time.

The symbol

appears on the display.

4. To deactivate the child lock, touch

the above buttons again until the

symbol disappears.

8.8 Starting a program

To start the program:

Touch the Start/Pause button.

The appliance starts and the LED above

the button stops flashing and stays on.

8.9 Program change

To change a program:

1. Push the

On/Off button to turn

the appliance off.

2. Push the On/Off button again to

turn on the appliance.

3. Set a new program.

8.10 Program end

Clean the filter and drain the

water container after each

drying cycle. (See chapter

CARE AND CLEANING.)

If the drying cycle is finished, the symbol

appears on the display. If the

Buzzer option is activated, the acoustic

signal sounds intermittently for 1 minute.

If you do not turn off the

appliance, the anti-crease

phase starts (not active with

all programs). Flashing

symbol signals the execution

of the anticrease phase.

Laundry can be removed

during this phase.

To remove the laundry:

1. Push the

On/Off button for 2

seconds to turn the appliance off.

2. Open the appliance door.

3. Remove the laundry.

4. Close the appliance door.

ENGLISH

15

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 23 24

Comments to this Manuals

No comments