AEG T8DBC946 User Manual Page 16

  • Download
  • Add to my manuals
  • Print
  • Page
    / 24
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 15
Clean the filter after each drying
cycle.
Do not use fabric softener to wash
and then dry. In the tumble dryer
laundry becomes soft automatically.
Use distilled water like that used for
steam ironing. If it is necessary, clean
the distilled water before (e.g. with a
coffee filter) to remove any particles.
Always keep the airflow slots at the
bottom of the appliance clear.
Make sure there is good airflow where
the appliance is to be installed.
9.2 Adjustment of default
dryness level
To change the default dryness level:
1. Turn the appliance on.
2. Select 1 of the available programs.
3. Touch and hold down the Extra
Silent and Refresh buttons at the
same time.
One of the symbols appears on the
display:
- Maximum dryness
- Extra dryness
- Standard dryness
4. Touch the Start/Pause button
repeatedly until you reach the
desired dryness level.
Dryness lev-
el
Display symbol
Maximum
dryness
Extra dry-
ness
Dryness lev-
el
Display symbol
Standard
dryness
5. To memorise the setting touch and
hold down the Extra Silent and
Refresh buttons at the same time for
approximately 2 seconds.
9.3 Deactivating the tank
indicator
The water container indicator is activated
by default. It illuminates at the end of the
drying cycle or during the cycle if the
water reservoir is full. If the draining kit is
installed the water container is drained
automatically and the indicator can be
deactivated.
To deactivate the indicator:
1. Turn the appliance on.
2. Select 1 of the available programs.
3. Touch and hold down Refresh and
Time Dry buttons at the same time.
One of 2 configurations is possible:
the Tank indicator:
is on if the
symbol
appears - the
water container indicator is
permanently activated
the Tank indicator:
is off if the
symbol
appears - the
water container indicator is
permanently deactivated
10.
CARE AND CLEANING
10.1 Cleaning the filter
At the end of each cycle the
Filter
symbol comes on the display and you
must clean the filter.
The filter collects the fluff
during the drying cycle.
www.aeg.com16
Page view 15
1 2 ... 11 12 13 14 15 16 17 18 19 20 21 22 23 24

Comments to this Manuals

No comments