Aeg Solo combo 15 User Manual download pdf (Page 12)

8.8 Switching the Handset On/Off

tPress and hold

for more than 2 seconds to switch the handset on or off in standby mode.

>The display will show “SEARCHING...” until the handset ﬁnds the base.

Note:

You can switch the handset off to save battery life, if the handset is not on the base or a charger pod

and you do not want to use it for a while.

Important:

When the handset is OFF, it cannot be used for making calls including emergency calls. It will not ring

when there is an incoming call. To answer a call, you will need to switch it back on and it may take some

time for the handset to re-establish a radio link with the base unit.

8.9 To Lock/Unlock the Keypad

You can lock the keypad to avoid making calls or pressing the keys accidentally.

tIn standby mode, press and hold

key for 2 seconds to lock the keypad.

>The handset displays “KEYS LOCKED”.

tTo turn the keypad lock off, press and hold

again.

Note:

Incoming calls can still be answered even if the keypad is locked.

8.10 Make an Internal Call

The system allows an intercom call between two handsets registered to the same telephone base, or a

cordless handset and the corded handset. It also allows you to transfer external calls from one handset

to another, and set up a 3-way conference with two handsets and an external call.

If you try to make a call while another handset is already on an external call, you will hear a busy tone

for a few seconds before the display returns to standby.

8.11 Initiate an Intercom Call to the Corded Base

tIn standby mode, press

>Intercom with the corded base is established immediately if there is only one registered cordless

handset.

>If there are more registered cordless handsets, the handset numbers which are available for

intercom will be displayed. Press 0 to call the corded base.

tPress

or pick up the corded handset from the corded base to answer the internal call, where both

internal callers can talk.

tTo end the intercom call, press

on the corded base or return the corded handset to the cordless

base.

Note:

If there is no answer from the corded base, or you wish to cancel the intercom call before it is answered,

press

to return to the external call.

8.12 Initiate an Intercom Call with another Registered Cordless Handset

tIn standby mode, press

>The handset numbers which are available for intercom will be displayed.

tPress the handset number you wish to call, or press

to call all handsets, including the corded

base.

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 41 42

Comments to this Manuals

No comments

Aeg Solo combo 15 User Manual Page 12

Comments to this Manuals

Related products and manuals for Phones Aeg Solo combo 15