AEG BE3003001M User Manual download pdf (Page 25)

CAUTION!

Put a cloth on the bottom of the

interior of the appliance. It pre-

vents damage to the lamp glass

cover and the cavity.

Always use the same lamp type.

Replacing the lamp at the cavity

ceiling:

1.

Turn the lamp glass cover counter-

clockwise to remove it.

2.

Clean the glass cover.

3.

Replace the lamp with a suitable 300

°C heat-resistant lamp.

4.

Install the glass cover.

10.3 Oven ceiling

You can fold down the heating element

on the oven ceiling to clean the oven

ceiling easily.

WARNING!

Deactivate the appliance before

you fold down the heating ele-

ment. Make sure that the appli-

ance is cold. There is a risk of

burns.

Folding down the heating element

1.

Remove the shelf supports.

2.

Hold the heating element with two

hands at the front.

3.

Pull it forwards against the spring

pressure and out along the supports

on the two sides.

4.

The heating element folds down.

You can clean the oven ceiling.

Installing the heating element

1.

Install the heating element in the

opposite sequence.

Install the heating element cor-

rectly above the supports on the

inner walls of the appliance.

2.

Install the shelf supports.

10.4 Cleaning the oven door

Removing the door and the glass panels

You can remove the oven door and the

internal glass panels to clean it. The

number of glass panels is different for

different models.

WARNING!

Be careful when you remove the

door from the appliance. The

door is heavy.

A

A

1.

Open the door fully.

2.

Fully press the clamping levers (A)

on the two door hinges.

3.

Close the oven door to the first

opening position (approximately 70°

angle).

4.

Hold the door with one hand on

each side and pull it away from the

appliance at an up angle.

ENGLISH 25

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 35 36

Comments to this Manuals

No comments