AEG SF2000 User Manual download pdf (Page 19)

Getting started

GB

3. Put the two lters in the juice

collector, the large lter should t

securely onto the clutch. The small

lter ts inside the large lter. Make

suretheylockintoplace(“click”).

1. The appliance will only function

if all parts have been properly

assembled and the lid has been

properly locked in place with the

handle.

2. Place the juice collector into the

appliance.

4. Place the pulp container into the

appliance by tilting it forwards

slightly. Insert the top rst and then

push the bottom end.

6. Slide the pusher into the feeding

tube by aligning the groove in the

pusher with the small protrusion on

the inside of the feeding tube.

5. Hold the lid over the lter and

lower it into position, snap the

handle onto the lid to lock it into

place(“click”).Makesurethehandle

is locked into position on both side of

the lid.

D

GR

NL

F

GB

19

1 2 ... 14 15 16 17 18 19 20 21 22 23 24

Comments to this Manuals

No comments