AEG DB8050 User Manual download pdf (Page 19)

Disposal

Packaging materials

The packaging materials are environ-

mentally friendly and can be recycled.

The plastic components are identi ed by

markings, e.g. >PE<, >PS<, etc.

Please dispose the packaging materials

in the appropriate container at the

community waste disposal facilities.

Old appliance

The symbol

on the product or on

its packaging indicates that this product

may not be treated as household waste.

Instead it shall be handed over to the

applicable collection point for the

recycling of electrical and electronic

equipment. By ensuring this product

is disposed of correctly, you will help

prevent potential negative consequences

for the environment and human health,

which could otherwise be caused by

inappropriate waste handling of this

product. For more detailed information

about recycling of this product, please

contact your local city o ce, your

household waste disposal service or the

shop where you purchased the product.

Troubleshooting

Problem Possible cause Solution

Soleplate is not heating even though iron is

turned on.

Connection problem Check main power supply cable, plug and

outlet.

Temperature control is in MIN position. Select adequate temperature.

Iron does not produce steam. Not enough water in tank. Fill water tank (see “Getting started”, no 2).

Steam control is selected in non-steam position. Set steam control between positions of

minimum steam and maximum steam (see

“Ironing chart”).

Spray function does not work. Not enough water in tank. Fill water tank (see “Getting started”, no 2).

Steam jet and vertical steam jet function does

not work.

Steam jet function was used very frequently

within a short period.

Put iron on horizontal position and wait

before using steam jet function.

Iron is not hot enough. Adjust the proper temperature to steam

ironing (up to

). Put iron in vertical

position and wait until temperature indicator

light turns o .

Water leaks from the soleplate during ironing. The iron is not hot enough. Set the temperature dial to a temperature

(

to maximum) suitable for steam ironing.

Put the iron on its heel and wait until the light

has gone out before you start ironing.

Flakes and impurities come out of the

soleplate during ironing.

You have used hard water, which has caused

scale  akes to develop in the water tank.

Use the self-clean function one or more times.

Water leaks from the soleplate while the iron is

cooling down or after it has been stored.

The iron has been put in horizontal position

while there is still water in the water tank.

Empty the water tank and set the steam

control to position o before storing the iron.

AEG IFU 5Safety Mahe 19.07.11.indd 19 19.07.11 11:19

1 2 ... 14 15 16 17 18 19 20

Comments to this Manuals

No comments

AEG DB8050 User Manual Page 19

Comments to this Manuals

Related products and manuals for Irons AEG DB8050