AEG HK956600FB User Manual download pdf (Page 12)

5. FLEXIBLE INDUCTION COOKING AREA

WARNING!

Refer to Safety chapters.

5.1 FlexiBridge function

The flexible induction cooking area

consists of four sections. The sections

can be combined into two cooking zones

with different size, or into one large

cooking area. You choose the

combination of the sections by choosing

the mode applicable to the size of the

cookware you want to use. There are

three modes: Standard (activated

automatically when you activate the

hob), Big Bridge and Max Bridge.

To set the heat setting use

two left side control bars.

Switching between the modes

To switch between the modes use sensor

field: .

When you switch between

the modes the heat setting

is set back to 0.

Diameter and position of the

cookware

Choose the mode applicable to the size

and the shape of the cookware. The

cookware should cover the selected area

as much as possible. Place the cookware

centrally on the selected area!

Place the cookware with the bottom

diameter smaller than 160 mm centrally

on a single section.

100-160mm

Place the cookware with the bottom

diameter larger then 160 mm centrally

between two sections.

> 160 mm

5.2 FlexiBridge Standard

mode

This mode is active when you activate

the hob. It connects the sections into two

separate cooking zones. You can set the

heat setting for each zone separately.

Use two left side control bars.

Correct cookware position:

www.aeg.com

12

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 23 24

Comments to this Manuals

No comments