AEG HK854320FB User Manual download pdf (Page 25)

4. DAILY USE

4.1 Activation and

deactivation

Touch for 1 second to activate or de-

activate the appliance.

4.2 Automatic Switch Off

The function deactivates the appliance

automatically if:

•

All cooking zones are deactivated (

).

• You do not set the heat setting after

you activate the appliance.

• You spill something or put something

on the control panel for more than 10

seconds, (a pan, a cloth, etc.). An

acoustic signal sounds some time and

the appliance deactivates. Remove the

object or clean the control panel.

• The appliance becomes too hot (e.g.

when, a saucepan boils dry). Before

you use the appliance again, wait for

the cooking zone to cool down.

• You use incorrect cookware. The sym-

bol

comes on and the cooking

zone deactivates automatically after 2

minutes.

• You do not deactivate a cooking zone

or change the heat setting. After some

time

comes on and the appliance

deactivates. See below.

• The relation between heat setting and

times of the Automatic Switch Off

function:

•

, - — 6 hours

•

- — 5 hours

•

- — 4 hours

•

- — 1.5 hours

4.3 The heat setting

Touch the control bar at the heat set-

ting. Move your finger along the control

bar to change the setting. Do not re-

lease before you have a correct heat set-

ting.

4.4 Bridge function

The Bridge function connects two cook-

ing zones and they operate as one.

First set the heat setting for one of the

cooking zone.

To activate the Bridge function touch

. To set or change the heat setting touch

one of the control sensors.

To deactivate the Bridge function touch

. The cooking zones operate inde-

pendently.

4.5 Automatic Heat Up

You can get a necessary heat setting in a

shorter time if you activate the Automat-

ic Heat Up function. This function sets

the highest heat setting for some time

(see the diagram), and then decreases to

the necessary heat setting.

To start the Automatic Heat Up function

for a cooking zone:

1.

Touch ( comes on in the dis-

play).

2.

Immediately touch the necessary

heat setting. After 3 seconds

comes on in the display.

To stop the function change the heat

setting.

1

2

3

4

5

6

7

8

9

10

11

12

0

1 2 3 4 5 6 7 8 9 101112 1314

ENGLISH 25

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 71 72

Comments to this Manuals

No comments