AEG HK654850XB User Manual download pdf (Page 9)

5.2 Automatic Switch Off

The function deactivates the hob

automatically if:

• all cooking zones are deactivated,

• you do not set the heat setting after

you activate the hob,

• you spill something or put something

on the control panel for more than 10

seconds (a pan, a cloth, etc.). An

acoustic signal sounds and the hob

deactivates. Remove the object or

clean the control panel.

• you do not deactivate a cooking zone

or change the heat setting. After

some time comes on and the hob

deactivates.

The relation between the heat setting

and the time after which the hob

deactivates:

Heat setting The hob deacti-

vates after

, 1 - 3

6 hours

4 - 7 5 hours

8 - 9 4 hours

10 - 14 1.5 hour

5.3 The heat setting

To set or change the heat setting:

Touch the control bar at the correct heat

setting or move your finger along the

control bar until you reach the correct

heat setting.

5.4 Activating and

deactivating the outer rings

You can adjust the surface you cook to

the dimension of the cookware.

Use sensor field:

To activate the outer ring: touch the

sensor field. The indicator comes on.

To deactivate the outer ring: touch the

sensor field until the indicator goes out.

5.5 Automatic Heat Up

Activate this function to get a desired

heat setting in a shorter time. When it is

on, the zone operates on the highest

setting in the beginning and then

continues to cook at the desired heating

setting.

To activate the function the

cooking zone must be cold.

To activate the function for a cooking

zone: touch

( comes on).

Immediately touch a desired heat

setting. After 3 seconds comes on.

To deactivate the function: change the

heat setting.

5.6 Timer

Count Down Timer

You can use this function to set how long

the cooking zone should operate for a

single cooking session.

First set the heat setting for the cooking

zone then set the function.

To set the cooking zone: touch

again and again until the indicator of a

necessary cooking zone comes on.

To activate the function: touch of

the timer to set the time (00 - 99

minutes). When the indicator of the

cooking zone starts to flash slowly the

time counts down.

To see the remaining time: set the

cooking zone with . The indicator of

the cooking zone starts to flash quickly.

The display shows the remaining time.

To change the time: set the cooking

zone with . Touch or .

To deactivate the function: set the

cooking zone with and touch . The

remaining time counts back to 00. The

indicator of the cooking zone goes out.

ENGLISH

9

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 23 24

Comments to this Manuals

No comments