Aeg HC411520GB User Manual download pdf (Page 33)

Flexible nonmetal pipes connection:

If it is possible to easily control the connection in its full area, you can use a flexible pipe.

Tightly attach the flexible pipe by clamps.

Liquid gas: use the rubber pipe holder. Always engage the gasket. Then continue with the

gas connection. The flexible pipe is prepared for apply when:

– it is no longer than 1500 mm;

– it shows no throttles;

– it is not subject to traction or torsion;

– it does not get in touch with cutting edges or corners;

– it can be easily examined in order to check its condition.

The control of preservation of the flexible pipe consists in checking that:

– it does not show cracks, cuts, marks of burnings on the two ends and on its full length;

– the material is not hardened, but shows its correct elasticity;

– the fastening clamps are not rusted;

– expired term is not due.

If one or more defects are visible, do not repair the pipe, but replace it.

When installation is complete, make sure that the seal of each pipe fitting is correct. Use a

soapy solution, not a flame!

Injectors replacement

1. Remove the pan supports.

2. Remove the caps and crowns of the burner.

3. With a socket spanner 7 remove the injectors and replace them with the ones which

are necessary for the type of gas you use.

Installation 33

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 79 80

No comments

Aeg HC411520GB User Manual Page 33