AEG SK71840-4I User Manual download pdf (Page 6)

Remove transport packaging

The appliance and the interior fittings are protected for transport.

• Remove all adhesive tape and packing pieces from the interior of the

appliance.

Shelf holders

Your appliance is equipped with shelf

retainers that make it possible to

secure the shelves during transporta-

tion.

To remove them proceed as follows:

Raise the shelf from the back, push it

in the direction of the arrow until it

is freed and remove the retainers.

Disposal of old Appliances

For environmental reasons, refrigeration appliances must be disposed of

properly. This applies to your old appliance, and - at the end of its service

life - to your new appliance as well.

Warning! Before disposing of old appliances make them inoperable.

Remove plug from mains, sever the power cable, remove or destroy any

snap or latch closures, to prevent small children being trapped inside.

• Use an authorised disposal site.

Contact your Local Council or Environmental Health Office to see if there

are facilities in your area to recycle the appliance.

Inner door reversal

1. Using a screwdriver release bracket

(1) by pressing on the internal spring

and withdraw it from its seat

together with the door; remove plug

(2) and fit it in the hole left open on

the opposite side; turn the door

through 180°, remove the bracket (1)

and refit it on the opposite side.

2. Refit the door and insert the top pin

and bottom bracket (1), pushing it

into place.

To ensure correct storage of food, the door is fitted with a simple spring

device which holds it in the open position until it is properly closed.

PR14

180°

D765

Instructions for building-in

Apply joint the sealing strip as shown

in figure.

1 2 3 4 5 6 7 8 9 10 11 12

Comments to this Manuals

No comments

AEG SK71840-4I User Manual Page 6

Comments to this Manuals

Related products and manuals for Fridges AEG SK71840-4I