AEG SCS51600S1 User Manual download pdf (Page 26)

Problem Possible cause Solution

The thickness of the frost is

greater than 4-5 mm.

Defrost the appliance.

The door has been

opened often.

Open the door only if necessa-

ry.

There is no cold air circula-

tion in the appliance.

Make sure that there is cold air

circulation in the appliance.

If the advice does not lead

to the desired result, contact

the nearest Authorised

Service Centre.

7.2 Replacing the lamp

CAUTION!

Disconnect the plug from

the mains socket.

1. Pull the left side of the lamp cover

with your fingers to unlock it. Remove

the cover by pulling it towards

yourself.

1

2

1

2. Replace the lamp with one of the

same power and shape, specifically

designed for household appliances.

The maximum power is shown on the

light bulb cover.

3. Install the lamp cover.

4. Connect the plug to the mains

socket.

5. Open the door.

Make sure that the light switches on.

7.3 Closing the door

1. Clean the door gaskets.

2. If necessary, adjust the door. Refer to

assembly instructions.

3. If necessary, replace the defective

door gaskets. Contact the Authorised

Service Centre.

8. INSTALLATION

8.1 Location

Refer to the assembly

instructions for the

installation.

To ensure best performance, install the

appliance well away from sources of heat

such as radiators, boilers, direct sunlight

etc. Make sure that air can circulate freely

around the back of the cabinet.

8.2 Positioning

Install the appliance in a dry, well

ventilated indoors where the ambient

temperature corresponds to the climate

class indicated on the rating plate of the

appliance.

www.aeg.com26

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 43 44

Comments to this Manuals

No comments