AEG A83400HLW0 User Manual download pdf (Page 14)

Problem Possible cause Solution

Many products are stored at

the same time.

Store less products at the

same time.

The thickness of the frost is

greater than 4-5 mm.

Defrost the appliance.

The lid has been opened of-

ten.

Open the lid only if necessa-

ry.

The FROSTMATIC function

is switched on.

Refer to "FROSTMATIC

function".

Products to be frozen are

placed too closely to each

other.

Make sure that there is cold

air circulation in the appli-

ance.

8.2 Customer Service

If your appliance is still not working

properly after making the above checks,

contact the nearest Authorised Service

Centre.

To obtain fast service, it is essential that

when you apply for it you specify the

model and serial number of your

appliance which can be found either on

the guarantee certificate or on the rating

plate located on the external right side

of the appliance.

8.3 Replacing the lamp

WARNING!

Do not remove the lamp

cover at the time of

replacement. Do not

operate the freezer if the

lamp cover is damaged or

missing.

1. Disconnect the mains plug from the

mains socket.

2. Replace the used lamp with a new

lamp of the same power and

specifically designed for household

appliances (the maximum power is

shown on the lamp cover).

3. Connect the mains plug to the mains

socket.

4. Open the lid. Make sure that the

lamp comes on.

9. INSTALLATION

WARNING!

Refer to Safety chapters.

9.1 Positioning

CAUTION!

If you are discarding an old

appliance that has a lock or

catch on the lid, you must

ensure that it is made

unusable to prevent young

children being trapped

inside.

www.aeg.com14

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 20

Comments to this Manuals

No comments