AEG EWA1260 User Manual download pdf (Page 16)

1. Before cleaning, always unplug the

appliance. Never rinse or immerse

thekettleorbaseunitinwater.Just

wipe with a damp cloth, using no

abrasive detergents. Occasionally

rinse out the kettle with clean water.

3. Decalcifying is recommended

regularly, depending on water

hardness. Fill the kettle with water

and decalcifyer according to

decalcifyer product instructions.

Do not boil the solution as it could

foam over. Afterwards, rinse kettle

thorougly with fresh water.

2. To clean the mesh lter, grab the

strainer insert and lift out. Cleaning

the heating plate –supercialspots

of rust may appear on the base unit.

Removewithastainlesssteelcleaning

agent.

Cleaning

Troubleshooting

Problem Possible cause Solution

The appliance switches o before boiling. Too much lime scale at the base of the kettle. Runthedecalcifyingprocedure.

The appliance does not switch o. Close lid until it locks.

Instert the strainer correcttly.

The appliance cannot be switched on. After operating with little or no water, the

appliance has not cooled down suently.

Allow to cool a short time and try again.

1 2 ... 11 12 13 14 15 16 17 18

No comments

AEG EWA1260 User Manual Page 16