AEG FSB41600Z User Manual download pdf (Page 32)

1. To enter the user mode, press and

hold simultaneously and

until the indicators ,

, and start to

flash and the display is blank.

2. Press .

• The indicators , and

go off.

• The indicator continues to

flash.

• The display shows the current

setting: = AirDry activated.

3. Press to change the setting:

= AirDry deactivated.

4. Press the on/off button to confirm

the setting.

7. OPTIONS

Desired options must be

activated every time before

you start a programme.

It is not possible to activate

or deactivate options while a

programme is running.

Not all options are

compatible with each other.

If you have selected non

compatible options, the

appliance will automatically

deactivate one or more of

them. Only the indicators of

the options still active will

stay on.

7.1 XtraDry

Activate this option when you want to

boost the drying performance. With the

use of this option, the duration of some

programmes, water consumption and

the last rinse temperature can be

affected.

The XtraDry option is a permanent

option for all programmes other than

and need not to be selected at

every cycle.

In other programmes the setting of

XtraDry is permanent and it is

automatically used in next cycles. This

configuration can be changed at any

time.

How to activate XtraDry

Press and hold simultaneously and

until the indicator comes

on.

If the option is not applicable to the

programme, the related indicator does

not come on or it flashes quickly for a

few seconds and then goes off.

The display shows the updated

programme duration.

8. BEFORE FIRST USE

1. Make sure that the current level of

the water softener agrees with the

hardness of the water supply. If

not, adjust the level of the water

softener.

2. Fill the salt container.

3. Fill the rinse aid dispenser.

4. Open the water tap.

5. Start a programme to remove any

processing residuals that can still be

inside the appliance. Do not use

detergent and do not load the

baskets.

When you start a programme, the

appliance can take up to 5 minutes to

recharge the resin in the water softener.

It seems that the appliance is not

working. The washing phase starts only

after this procedure is completed. The

procedure will be repeated periodically.

www.aeg.com32

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 67 68

Comments to this Manuals

No comments