USER MANUALEN User ManualDishwasherFFB52610ZM
Water hardnessGerman de-grees (°dH)French degrees(°fH)mmol/l Clarke de-greesWater softener lev-el47 - 50 84 - 90 8.4 - 9.0 58 - 63 1043 - 46 76 - 83 7
• The indicators and areoff.• The indicator stillflashes.• The display shows the currentsetting.– = rinse aid emptynotification activated.– =
Activating options can affectthe water and energyconsumption as well as theprogramme duration.7.1 XtraDryActivate this option to boost the dryingperfo
4. Carefully shake the funnel by itshandle to get the last granulesinside.5. Remove the salt around the openingof the salt container.6. Turn the cap o
2. Press the on/off button to activatethe appliance.Make sure that the appliance is inprogramme selection mode.• If the salt indicator is on, fill the
Opening the door while theappliance operatesOpening the door while a programme isrunning stops the appliance. It may affectthe energy consumption and
• In areas with hard and very hard waterwe recommend to use plaindishwasher detergent (powder, gel,tablets containing no additionalagents), rinse aid
11. CARE AND CLEANINGWARNING!Before maintenance,deactivate the appliance anddisconnect the mains plugfrom the main socket.Dirty filters and cloggedspr
CAUTION!An incorrect position of thefilters can cause badwashing results and damageto the appliance.11.2 Cleaning the spray armsDo not remove the spra
Problem and alarm code Possible cause and solutionThe program does not start. • Make sure that the appliance door is closed.• Press Start.• If the del
CONTENTS1. SAFETY INFORMATION...22. SAFETY INSTRUCTIONS...
Problem and alarm code Possible cause and solutionThe appliance trips the cir-cuit-beaker.• The amperage is insufficient to supply simultaneously allt
Problem Possible cause and solutionThe dishes are wet. • For the best drying performance activate the optionXtraDry and set AirDry .• The programme do
Refer to "Before first use", "Daily use" or "Hints andtips" for other possiblecauses.13. TECHNICAL INFORMATIONDimensions
ENHazardous substancesParts Name Pb Hg Cd Cr6+ PBBs PBDEsCabinetXTubSump & hydraulics (including pumps, heater & sensors)XSoftener & inner
www.aeg.com/shop156928980-A-092018
manufacturer is not responsible for any injuries ordamages that are the result of incorrect installation orusage. Always keep the instructions in a sa
• If the supply cord is damaged, it must be replaced bythe manufacturer, its Authorised Service Centre orsimilarly qualified persons in order to avoid
fuse, use only a 13 A ASTA (BS 1362)fuse.2.3 Water connection• Do not cause damage to the waterhoses.• Before connection to new pipes,pipes not used f
3. PRODUCT DESCRIPTION54810 9 116712 2311Worktop2Upper spray arm3Lower spray arm4Filters5Rating plate6Salt container7Air vent8Rinse aid dispenser9Dete
4. CONTROL PANEL12 4 568371On/off button2Program button3Programme indicators4Display5Delay button6Option button7Indicators8Start button4.1 IndicatorsI
Indicator DescriptionDelay indicator.Door indicator. It comes on when the appliance door is open or is not cor-rectly closed.5. PROGRAMMESProgramme De
Programme 1)Water(l)Energy(kWh)Duration(min)13 - 15 1.4 - 1.6 140 - 1609 0.8 3013 - 14 0.9 - 1.1 70 - 851) The pressure and the temperature of the wat
Comments to this Manuals