Aeg F77709M0P User Manual Page 29

  • Download
  • Add to my manuals
  • Print
  • Page
    / 68
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 28
Make sure that glasses do not touch
other glasses.
Put the small items in the cutlery bas-
ket.
Put the light items in the upper bas-
ket. Make sure that they do not move.
Make sure that the spray arms can
move freely before you start a pro-
gramme.
8.3 Using salt, rinse aid and
detergent
Only use salt, rinse aid and detergent
for dishwasher. Other products can
cause damage to the appliance.
The rinse aid helps, during the last
rinsing phase, to dry the dishes with-
out streaks and stains.
Combi detergent tablets contain de-
tergent, rinse aid and other added
agents. Be sure that these tablets are
applicable to the water hardness in
your area. Refer to the instructions on
the packaging of the products.
Detergent tablets do not fully dissolve
with short programmes. To prevent
detergent residues on the tableware,
we recommend that you use the tab-
lets with long programmes.
Do not use more than the correct
quantity of detergent. Refer to
the instructions on the detergent
packaging.
8.4 Before starting a
programme
Make sure that:
The filters are clean and correctly in-
stalled.
The spray arms are not clogged.
The position of the items in the bas-
kets is correct.
The programme is applicable for the
type of load and for the degree of soil.
The correct quantity of detergent is
used.
There is dishwasher salt and rinse aid
(unless you use combi detergent tab-
lets).
The cap of the salt container is tight.
9. CARE AND CLEANING
WARNING!
Before maintenance, deactivate
the appliance and disconnect the
mains plug from the mains sock-
et.
Dirty filters and clogged spray
arms decrease the washing re-
sults.
Make a check regularly and, if
necessary, clean them.
9.1 Cleaning the filters
A
B
C
C
1.
Turn the filter (A) counterclockwise
and remove it.
ENGLISH 29
Page view 28
1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 67 68

Comments to this Manuals

No comments