Aeg F77012W0P User Manual download pdf (Page 27)

Manual adjustment

Turn the water hardness dial to the posi-

tion 1 or 2.

Electronic adjustment

1. Press the on/off button to activate

the appliance.

2. Make sure that the appliance is in

setting mode. Refer to ‘SETTING

AND STARTING A PROGRAMME’.

3. Press and hold Delay and Start at

the same time until the indicators (A),

(B) and (C) flash.

4. Press Program.

• The indicators (B) and (C) go off.

• The indicator (A) continues to flash.

• The display shows the setting of

the water softener. Example:

level 5.

5. Press Program again and again to

change the setting.

6. Deactivate the appliance to confirm.

6.2 Filling the salt container

Turn the cap counterclockwise and

open the salt container.

Put 1 litre of water in the salt con-

tainer (only for the first time).

Fill the salt container with dishwash-

er salt.

Remove the salt around the opening

of the salt container.

Turn the cap clockwise to close the

salt container.

CAUTION!

Water and salt can come out

from the salt container when you

fill it. Risk of corrosion. To pre-

vent it, after you fill the salt con-

tainer, start a programme.

ENGLISH 27

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 75 76

No comments

Aeg F77012W0P User Manual Page 27