AEG F55600VI1P User Manual download pdf (Page 31)

German de-

grees (°dH)

French degrees

(°fH)

mmol/l Clarke de-

grees

Water softener lev-

el

43 - 46 76 - 83 7.6 - 8.3 53 - 57 9

37 - 42 65 - 75 6.5 - 7.5 46 - 52 8

29 - 36 51 - 64 5.1 - 6.4 36 - 45 7

23 - 28 40 - 50 4.0 - 5.0 28 - 35 6

19 - 22 33 - 39 3.3 - 3.9 23 - 27

5

1)

15 - 18 26 - 32 2.6 - 3.2 18 - 22 4

11 - 14 19 - 25 1.9 - 2.5 13 - 17 3

4 - 10 7 - 18 0.7 - 1.8 5 - 12 2

<4 <7 <0.7 < 5

1

2)

1)

Factory setting.

2)

Do not use salt at this level.

If you use multi-tablets containing salt

and the hardness of your water is lower

than 21dH, you can set the lowest water

softener level. It deactivates the salt refill

indicator.

If you use standard detergent or multi-

tablets without salt, set the proper

water hardness level to keep the salt

refill indicator active.

How to set the water softener

level

The appliance must be in programme

selection mode.

1. To enter the user mode, press and

hold simultaneously

and until

the indicators , , and

start to flash and the display is blank.

2. Press

.

• The indicators , and go

off.

• The indicator

continues to

flash.

• The display shows the current

setting: e.g.

= level 5.

3. Press

again and again to change

the setting.

4. Press the on/off button to confirm

the setting.

6.3 The rinse aid dispenser

The rinse aid helps to dry the dishes

without streaks and stains.

The rinse aid is automatically released

during the hot rinse phase.

You can set the released quantity of rinse

aid between level 1 (minimum quantity)

and level 6 (maximum quantity). Level 0

will deactivate the rinse aid dispenser

and no rinse aid will be released.

Factory setting: level 4.

How to set the rinse aid level

The appliance must be in programme

selection mode.

1. To enter the user mode, press and

hold simultaneously and until

the indicators

, , and

start to flash and the display is blank.

2. Press .

• The indicators

, and go

off.

• The indicator continues to

flash.

ENGLISH

31

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 67 68

Comments to this Manuals

No comments