AEG F55200VI0 User Manual download pdf (Page 30)

Delay start button

Use the delay start button to delay the start of the washing programme with an interval

between 1 and 19 hours. Refer to the chapter 'Setting and starting a washing programme'.

Digital display

The display shows:

• Adjusted level of the water softener.

• Programme duration.

• Remaining time to the end of the programme.

• End of a washing programme.

• Number of hours in delay start.

• Fault codes.

• Activation/deactivation of the audible signals.

SILENT button

Silent is a silent washing programme that will not disturb you. It can be set in times with a

more economical power rate.

During the Silent the pump runs at a very low speed to reach a noise level reduction of

25% compared to the declaration programme. As a consequence, it has a very long running

time.

Function buttons

Use the function buttons for these operations:

• To set the water softener. Refer to the chapter 'Setting the water softener'.

• To deactivate/activate the audible signals. Refer to the section 'Audible signals'.

• To cancel the washing programme in progress or a delay start in progress. Refer to the

chapter 'Setting and starting a washing programme'.

Audible signals

You can hear an audible signal:

• At the end of the washing programme.

• During the setting of the level of the water softener.

• When the appliance has a malfunction.

The activation of the audible signals is set at the factory.

Do these steps to deactivate the audible signals:

1. Switch on the appliance.

2. Make sure that the appliance is in setting mode.

3. Press and hold function buttons B and C until the indicator lights of function buttons

A, B and C start to flash.

4. Release function buttons A and B.

5. Press the function button C.

– Indicator lights for function buttons A and B go off.

– Indicator light for function button C flashes.

30 Control panel

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 71 72

No comments

AEG F55200VI0 User Manual Page 30