AEG LAVATHERM 56609 EXCLUSIV Operations Instructions download pdf (Page 28)

Troubleshooting

Replace the filament bulb

0 Procure a special filament bulb for your Lavatherm through the

customer service organisation (ET-No. 647072580).

Warning! Never use standard lamp bulbs in your Lavatherm! They

produce too much heat, causing overheating under the lamp covering

hood and possible damage.

0 Disconnect the mains plug. With fixed connection: Screw-out the fuse

or switch-off the circuit breaker.

0 Screw-off the covering hood of the filament bulb. (The filament bulb is

located at the top behind the fill-in door; see Front view).

0 Replace the defective filament bulb.

0 Screw-on the covering hood over the filament bulb again.

Warning! For safety reasons the covering hood must be screwed-on.

Otherwise the dryer must not be operated.

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 34 35 36

No comments

AEG LAVATHERM 56609 EXCLUSIV Operations Instructions Page 28