AEG FSS5260LP User Manual

USER MANUALEN User ManualDishwasherFSS5260LP

German de-grees (°dH)French degrees(°fH)mmol/l Clarke de-greesWater softener lev-el<4 <7 <0.7 < 51 2)1) Factory setting.2) Do not use salt

– The levels of rinse aid rangefrom 0A to 6A where level 0Ameans rinse aid is not used.2. Press repeatedly to change thesetting.3. Press on/off to c

7. OPTIONSDesired options must beactivated every time beforeyou start a programme.It is not possible to activateor deactivate options while aprogramme

3. Fill the rinse aid dispenser.4. Open the water tap.5. Start a programme to remove anyprocessing residuals that can still beinside the appliance. Do

Fill the rinse aid dispenserwhen the indicator (A)becomes clear.If you use multi-tablets andthe drying performance issatisfactory, the rinse aidrefill

Starting a programme withdelay start1. Set a programme.2. Press again and again until thedisplay shows the delay time youwant to set (from 1 to 24 h

completely reached and washed bythe water released from the spray armnozzles. Make sure that items do nottouch or cover each other.• You can use dishw

10.6 Unloading the baskets1. Let the tableware cool down beforeyou remove it from the appliance.Hot items can be easily damaged.2. First remove items

7. Reassemble the filters (B) and (C).8. Put back the filter (B) in the flat filter(A). Turn it clockwise until it locks.CAUTION!An incorrect position

11.4 Internal cleaning• Carefully clean the appliance,including the rubber gasket of thedoor, with a soft damp cloth.• If you use short duration progr

CONTENTS1. SAFETY INFORMATION...22. SAFETY INSTRUCTIONS...

Problem and alarm code Possible cause and solutionThe anti-flood device is on.The display shows .• Close the water tap and contact an Authorised Serv

12.1 The washing and drying results are not satisfactoryProblem Possible cause and solutionPoor washing results. • Refer to "Daily use", &qu

Problem Possible cause and solutionThere are residues of deter-gent in the dispenser at theend of the programme.• The detergent tablet got stuck in th

Power consumption Off-mode (W) 0.101) Refer to the rating plate for other values.2) If the hot water comes from alternative source of energy, (e.g. so

www.aeg.com/shop117883410-A-132017

manufacturer is not responsible for any injuries ordamages that are the result of incorrect installation orusage. Always keep the instructions in a sa

• Do not leave the appliance with the open doorunattended to avoid stepping accidentally onto it.• Before any maintenance operation, deactivate theapp

• Ensure that there are no visible waterleaks during and after the first use ofthe appliance.• The water inlet hose has a safety valveand a sheath wit

3. PRODUCT DESCRIPTION54679 8 12 23111 10 1Top spray arm2Upper spray arm3Lower spray arm4Filters5Rating plate6Salt container7Air vent8Rinse aid dispe

4. CONTROL PANEL123 4 5 6 7 891On/off button2Display3Delay button4Program button5ExtraHygiene button6TimeSaver button7XtraDry button8Reset button9Indi

Programme Degree of soilType of loadProgramme phases OptionsP5 • Normal or lightsoil• Delicate crock-ery and glass-ware• Wash 45 °C• Rinses• Dry• Xtra

6. SETTINGS6.1 Programme selectionmode and user modeWhen the appliance is in programmeselection mode it is possible to set aprogramme and to enter the