AEG FFE62800PM User Manual

USER MANUALEN User ManualDishwasherFFE62800PMFFE62800PW

German de-grees (°dH)French degrees(°fH)mmol/l Clarke de-greesWater softener lev-el43 - 46 76 - 83 7.6 - 8.3 53 - 57 937 - 42 65 - 75 6.5 - 7.5 46 - 5

– The levels of rinse aid rangefrom 0A to 6A.– Level 0 = no rinse aidreleased.3. Press repeatedly to change thesetting.4. Press on/off to confirm th

While the drying phaseoperates, a device opens theappliance door. The door isthen kept ajar.CAUTION!Do not try to close theappliance door within 2minu

7.1 XtraDryActivate this option when you want toboost the drying performance. With useof this option, the duration of someprogrammes, water consumptio

8.1 The salt containerCAUTION!Only use salt specificallydesigned for dishwashers.The salt is used to recharge the resin inthe water softener and to as

If you use multi-tablets andthe drying performance issatisfactory, the rinse aidrefill indication can bedisabled.We recommend to alwaysuse rinse aid f

returns to its basic position on thelower level.There are two ways of lowering thebasket depending on the loading:• If there is a full load of platess

If the door is opened formore than 30 secondsduring the drying phase, therunning programme will end.This will not happen if thedoor is opened by AirDr

instructions on the detergentpackaging.10.3 What to do if you want tostop using multi-tabletsBefore you start to use separatelydetergent, salt and rin

CBA1. Turn the filter (B) counterclockwiseand remove it.2. Remove the filter (C) out of filter (B). 3. Remove the flat filter (A).4. Wash the filters.

CONTENTS1. SAFETY INFORMATION...22. SAFETY INSTRUCTIONS...

11.2 Cleaning the upper sprayarmWe recommend to clean regularly theupper spray arm to avoid soil to clog theholes.Clogged holes can cause unsatisfacto

With some problems, the displayshows an alarm code.The majority of problems that canoccur can be solved without the needto contact an Authorised Servi

Problem and alarm code Possible cause and solutionSmall leak from the appli-ance door.• The appliance is not levelled. Loosen or tighten the ad-justab

Problem Possible cause and solutionThere are stains and dry waterdrops on glasses and dishes.• The released quantity of rinse aid is not sufficient. A

Problem Possible cause and solutionDull, discoloured or chippedtableware.• Make sure that only dishwasher-safe items are washedin the appliance.• Load

ENGLISH 25ENHazardous substancesParts Name Pb Hg Cd Cr6+ PBBs PBDEsCabinetXTubSump & hydraulics (including pumps, heater & sensors)XSoftener &

www.aeg.com26

ENGLISH 27

www.aeg.com/shop117876251-A-492017

manufacturer is not responsible for any injuries ordamages that are the result of incorrect installation orusage. Always keep the instructions in a sa

• Do not leave the appliance with the open doorunattended to avoid stepping accidentally onto it.• Before any maintenance operation, deactivate theapp

2.4 Use• Do not sit or stand on the open door.• Dishwasher detergents aredangerous. Obey the safetyinstructions on the detergentpackaging.• Do not dri

11Trigger handle12Lower basket handle13Upper basket14Cutlery drawer3.1 Beam-on-FloorThe Beam-on-Floor is a light that isdisplayed on the floor below t

5. PROGRAMMESProgramme Degree of soilType of loadProgramme phases OptionsP1 1)• Normal soil• Crockery andcutlery• Prewash• Wash 50 °C• Rinses• Dry• Ex

Programme Degree of soilType of loadProgramme phases OptionsP7 6)• Normal soil• Crockery andcutlery• Prewash• Wash 50 °C• Rinses• Dry• XtraDry1) With

Programme 1)Water(l)Energy(kWh)Duration(min)P79 - 10 1.1 - 1.3 230 - 2501) The pressure and the temperature of the water, the variations of the mains