Aeg VITRAMIC 725K User Manual

VITRAMIC 725 KAEGBuild-in Hotplate Unit Einbau-KochmuldeInstructions for Installation and Use Montage- und Gebrauchsanweisung

Care and cleaning of the ceramic hobCleaning procedure1. Clean the ceramic hob after every use with a clean, damp cloth and a little washing up liqui

Installation instructions For the installerSafety instructions- According to the technical connection conditions of the electricity board serving you

For the kitchen furniture installerSafety instructionsPlease note that veneers and plastic coatings on the unit housings must be treated with heat- re

For the kitchen furniture installerRating platePlease state the product number (E. No.) and the serial number (F. No.) of the hob; these will be found

It is essential to read these instructions and keep them in a safe placeContentsPagePageIllustrations3-5 Care and cleaning of the hotplates 9/10Equipm

Equipment and descriptionFigure 1A Dual circuit hotplate 12 cm and 21 cm 0 with corresponding switch B Roaster piate 14.5 cm x 25 cm with correspondin

Using the. hotplatesThe correct utensilsAlways use pans with a flat base. Uneven pots and pans do not absorb the heat from the cooking zone properly,

Using the hotplatesImportantIf the surface is cracked or fractured, the hob must not be used. The hob should be switched off at the mains supply and A

Operation of the hotplatesRoaster plateSwitch on the small diameter hotplate (14.5 cm) as described under “Simmering and frying”. The roaster plate is