AEG L99695HWD User Manual download pdf (Page 23)

In the display comes on and a

message tells you that the programme is

completed.

The indicator of Start/Pauze - Départ/

Pause button goes off.

1. Press the button Aan/Uit - Marche/

Arrêt to deactivate the appliance.

After five minutes from the end of the

programme, the energy saving function

automatically deactivates the appliance.

When you activate the

appliance again, the display

show the end of the last set

programme. Turn the

programme knob to set a

new cycle.

2. Remove the laundry from the

appliance.

3. Make sure that the drum is empty.

4. Keep the door ajar, to prevent

mildew and odours

5. Close the water tap.

10.14 Draining water out after

end of cycle

The washing programme is completed,

but there is water in the drum:

• The drum turns regularly to prevent

the creases in the laundry.

• The door stays locked.

• You must drain the water to open the

door:

1. If necessary, decrease the spin

speed.

2. Touch the Start/Pauze - Départ/

Pause button.

The appliance drains the water and

spins.

3. When the programme is completed

and the door lock indicator goes off,

you can open the door.

4. Press Aan/Uit - Marche/Arrêt some

seconds to deactivate the appliance.

The appliance drains and

spins automatically after

approximately18 hours.

10.15 AUTO Stand-by option

The AUTO Stand-by option automatically

deactivates the appliance to decrease

the energy consumption when:

• You do not use the appliance for 5

minutes before you press Start/Pauze

- Départ/Pause button.

Press the button Aan/Uit - Marche/

Arrêt to activate the appliance again.

• After 5 minutes from the end of the

washing programme

Press the button Aan/Uit - Marche/

Arrêt to activate the appliance again.

The display shows the end of the last

set programme.

Turn the programme knob to set a

new cycle.

11.

DAILY USE - DRYING

WARNING!

Refer to Safety chapters.

11.1 Preparation to drying

WARNING!

Open the water tap. Put

the drain hose in the sink

or connect to the drain

pipe.

1. Press buttonAan/Uit - Marche/Arrêt

for some seconds to activate the

appliance

2. Load the laundry one item at a time.

3. Turn the programme dial to the

drying programme applicable for the

items to dry.

The text bar in the display tells which

programme you have chosen.

When drying a big amount

of laundry, to have good

drying performances, make

sure that the laundry itself is

not rolled up and that is

uniformly distributed in the

drum.

ENGLISH 23

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 47 48

Comments to this Manuals

No comments