AEG L99695HWD User Manual Page 17

  • Download
  • Add to my manuals
  • Print
  • Page
    / 48
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 16
At programme start the display shows the duration programme for the
maximum load capacity. During the washing phase the programme du-
ration is automatically calculated and can be greatly reduced if the laun-
dry load is lower than the maximum load capacity (e.g. Cotton 60°C,
maximum load capacity 9 kg, the programme duration exceeds 2 hours;
real load 1 kg, the programme duration don’t reach 1 hour). When the
appliance is calculating the real programme duration a dot blinks in the
display.
Programmes Load
(kg)
Energy
consump-
tion (kWh)
Water con-
sumption (li-
tre)
Approximate pro-
gramme duration
(minutes)
Cottons 60 °C 9 1.68 71 180
Cotton Energy Saving Pro-
gramme 60 °C
1)
9 1.094 69 238
Cottons 40 °C 9 1.05 71 175
Synthetics 40 °C 4 0.88 60 142
Delicates 40 °C 4 0.70 63 91
Wool/Handwash 30 °C 1.5 0.35 59 58
1)
«Cotton Energy Saving programme » at 60°C with a load of 9 kg is the reference programme for the
data entered in the energy label, in compliance with EEC 92/75 standards.
7. SETTINGS
7.1 Acoustic signals
You can hear the acoustic signals when:
You activate the appliance.
You deactivate the appliance.
You touch the buttons.
The programme is completed.
The appliance has a malfunction.
To deactivate/activate the acoustic
signals, press Vlekken - Taches / Voorwas
- Prélavag and Extra Spoelen - Rinçage +
at the same time for 6 seconds.
If you deactivate the
acoustic signals, they
continue operate only when
you touch the buttons and
when a malfunction occurs.
7.2 Child Lock function
With this function you can prevent that
the children play with the control panel.
To activate/deactivate this function,
touch Temp.°C and T/min. buttons at
the same time until the indicator
comes on/goes off.
You can activate this function:
After you touch Start/Pauze - Départ/
Pause : all the buttons and the
programme knob are deactivated.
Before you touch Start/Pauze -
Départ/Pause : the appliance cannot
start.
7.3 Permanent Extra Rinse
With this function you can keep the extra
rinse permanently on when you set a new
programme.
To activate/deactivate this function
touch Tijd Besparen - Gain de Temps
and Startuitstel - Départ Différé at the
same time until the display show the
indicator comes on/goes off.
ENGLISH
17
Page view 16
1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 47 48

Comments to this Manuals

No comments