AEG L99695HWD User Manual download pdf (Page 20)

function, put the stain remover into

compartment .

The programme duration

increases. This function is

not available with a

temperature lower than

40° C.

8.12 T./min

Touch button T./min to:

• Decrease the maximum speed of the

spin phase of the programme.

The display shows only

the spin speeds available

for the set programme.

• Deactivate the spin phase ( 'No spin'

function).

• Activate the Rinse Hold function.

Set this function to prevent fabric

creases. The appliance does not drain

the water when the programme is

completed.

8.13 Temp.°C

Touch this button to change the default

temperature.

Symbols and = cold water

9. BEFORE FIRST USE

1. Connect the mains plug to the mains

socket.

2. Open the water tap.

3. Put a small quantity of detergent in

the compartment for washing phase.

4. Set and start a programme for cotton

at the highest temperature without

laundry.

This removes all possible dirt from the

drum and the tub.

9.1 Clock setting

After you set the language, the display

tells to set the clock. The hour digits

flash.

1. Turn the programme knob to change

the hour.

2. Touch Start/Pauze - Départ/Pause

button to confirm the selection.

The minute digits flash.

3. Turn the programme knob to change

the minutes.

4. Touch Start/Pauze - Départ/Pause

button to confirm the selection.

9.2 Change the time of the

day after the first activation

1. Touch the buttonExtra Spoelen -

Rinçage+ and the button Tijd

Besparen - Gain de Temps at the

same time for some seconds.

The hour digits flash.

2. Turn the programme knob to change

the hour.

3. Touch Start/Pauze - Départ/Pause

button to confirm the selection.

The minute digits flash.

4. Turn the programme knob to change

the minutes.

5. Touch Start/Pauze - Départ/Pause

button to confirm the selection.

9.3 Language setting

The first time you activate the appliance,

the display shows the default language

and tells you to confirm it or change it:

1. Turn the programme knob to set the

desired language.

2. When the display shows the

necessary language touch Start/

Pauze - Départ/Pause button to

confirm the selection.

9.4 Change the language after

the first activation

1. Touch button T./min and button

Vlekken - Taches/Voorwas -

Prélavage at the same time for some

seconds.

2. When the display shows the

language set, turn the programme

knob to set the new language.

3. Touch Start/Pauze - Départ/Pause

button to confirm the selection.

www.aeg.com

20

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 47 48

Comments to this Manuals

No comments