AEG L99695HWD User Manual download pdf (Page 35)

16.1 Introduction

The start of the appliance does not occur or it stops during operation.

First try to find a solution to the problem (refer to the table). If not, contact the Authorised

Service Centre.

With some problems, the acoustic signals operate and the display shows an alarm

message:

CAUTION!

Deactivate the appliance before you do the checks.

16.2 Possible failures

Problems with alarm messages

Message Possible solution

The display tells to check the

tap: the appliance does not

fill with water.

Make sure that the water tap is open.

Make sure that the pressure of the water supply is not too

low. For this information, contact your local water authori-

ty.

Make sure that the water tap is not clogged or is furred

with lime-scale.

Make sure that the filter of the inlet hose and the filter of

the valve are not clogged. Refer to “Care and cleaning”.

Make sure that the inlet hose is not damaged.

Make sure that the connection of the water inlet hose is

correct.

The display tells to check the

drain filter: the appliance

does not drain the water.

Make sure that the drain hose is not damaged.

Make sure that the drain filter is not clogged. Clean the

filter, if necessary. Refer to 'Care and cleaning'.

Make sure that the connection of the drain hose is cor-

rect.

The display tells to check the

door.

Make sure that the appliance door is not open or closed

correctly.

The display tells there is a

water alert.

The anti-flood device is activated:

• Disconnect the appliance.

• Close the water tap.

• Contact the service centre.

The display tells that the

main supply is unstable.

Wait until the mains supply is stable. The appliance auto-

matically starts operating.

ENGLISH 35

1 2 ... 30 31 32 33 34 35 36 37 38 39 40 ... 47 48

Comments to this Manuals

No comments

AEG L99695HWD User Manual Page 35

Comments to this Manuals

Related products and manuals for Washing machines AEG L99695HWD