USER MANUALEN User ManualWasher DryerL 99695 HWD
DDigit areaTime of the dayWhen you activate the appliance the display shows the time of the day for someseconds. To adjust the clock, refer to "C
FTime saveThe indicator comes on when you set one of the programme dura-tion.Shortened timeExtra QuickG Indicator for air filtersHExtra rinsingThe val
5. PROGRAMS5.1 Programme ChartProgrammeTemperaturerangeMaximum loadMaximum spinspeedProgramme description(Type of load and soil level)Washing/Drying p
ProgrammeTemperaturerangeMaximum loadMaximum spinspeedProgramme description(Type of load and soil level)Fijne Was - Déli-cats40°C - Cold4 kg1200 rpmDe
ProgrammeTemperaturerangeMaximum loadMaximum spinspeedProgramme description(Type of load and soil level)Opfrissen - Rafraî-chirup to 1.5 kg Steam prog
ProgrammeT./minPrewashStainsSoakExtra Spoelen - Rinçage+1)Tijd Besparen - Gain de Temps2)Startuitstel - Départ DifféréSynthetica - Synthé-tiques
Dryness Level Type of fabric LoadCupboard Dry1)For items to be storedCottons and Linen(bathrobes, bath towels, etc)up to 6 kgSynthetics and mixed fabr
5.4 Woolmark Apparel Care -Blue• The wool wash cycle of this machinehas been approved by The WoolmarkCompany for the washing of woolgarments labelled
Programmes Load(kg)Energyconsump-tion (kWh)Water con-sumption (li-tre)Approximate pro-gramme duration(minutes)Wool/Handwash 30°C 1.5 0.35 59 581) «Cot
8.3 Programme knobTurn this knob to set a programme. Therelated programme indicator comes on.8.4 Automatisch -AutomatiqueTouch this button to set one
CONTENTS1. SAFETY INFORMATION...32. SAFETY INSTRUCTIONS...
The display shows onlythe spin speeds availablefor the set programme.• Deactivate the spin phase ( 'No spin'function).• Activate the Rinse H
10.2 Activating the applianceand setting a programme1. Press button Aan/Uit - Marche/Arrêtto activate the appliance.2. Turn the programme knob to ther
10.5 Liquid or powderdetergent1.12Open the detergent dispenser.2.APosition A: for powder detergent (factorysetting).3.BRotate the flap downwards.Posit
10.7 Cycle time recalculationAfter approximately 15minutes from the start of theprogramme:• The appliance adjustsautomatically the cycletime to the la
• You must drain the water to open thedoor:1. If necessary, decrease the spinspeed.2. Touch the Start/Pauze - Départ/Pause button.The appliance drains
At the beginning of thedrying cycle (3 – 5 min.)there could be a slightlyhigher sound level. This isthe compressor start and it isquite normal for com
12.1 NON-STOP programmeYou can wash and dry your laundrysetting a «non stop-programme».Proceed as follows:1. Press button Aan/Uit - Marche/Arrêtfor so
To prevent the fluff in your laundry, werecommend that you:• To do not wash dark fabrics after youwashed and dried light colouredfabrics (new sponge,
• Obey the instructions that you find onthe on packaging of these products.• Use the correct products for the typeand colour of the fabric, theprogram
13.11 General TipsRefer to the «Drying programmes» tableto find the average drying times.The experience will help you to dry thelaundry in a more corr
1. SAFETY INFORMATIONBefore the installation and use of the appliance,carefully read the supplied instructions. Themanufacturer is not responsible f
14.5 Cleaning the detergent dispenser1.122.3. 4.14.6 Cleaning the air filtersThe air filters collect the fluff. The fluff normally occurs when the clo
3. PULL4. PULL5. PULL6. 7. 8. 9.10. +To have best drying performances clean regularly the air filters with warmwater and afterwards dry them with a t
14.7 Cleaning the drain filterWARNING!Do not clean the drain filter if the water in the appliance is hot.WARNING!Each time you carry out the special p
7. 8.129.12 14.8 Cleaning the inlet hose filter and the valve filterIt could be necessary to clean the filters when:• The appliance does not fill with
• Remove the inlet hose behind theappliance.• Clean the filter in the valve with a stiffbrush or a towel.45°20°• Install again the inlet hose. Make su
WARNING!Make sure that the temperature is more than 5 °C and the water is flowingfrom the tap before you use the appliance again.The manufacturer is n
Message Possible solution Make sure that the connection of the drain hose is cor-rect.The display tells to check thedoor.Make sure that the appliance
Problem Possible solutionThe spin phase does not op-erate or the washing cyclelasts longer than usually.Make sure that the spin phase is not off. Mak
Problem Possible solutionThe washing cycle is shorterthan the time displayed.The appliance calculates a new time according to thelaundry load.The wash
Make sure that the waterlevel inside the drum is nottoo high. If necessary,proceed with anemergency drain (refer to«Emergency drain» in«Care and clean
• Do not install the appliance behind a lockable door, asliding door or a door with a hinge on the oppositeside, that would prevent the appliance door
• Remove the cardboard top.• Remove the polystyrene packagingmaterials.• Remove the internal film.• Open the door.• Remove the polystyrene piece fromt
• Pull up the appliance in verticalposition.• Remove the power supply cable andthe drain hose from the hose holders.It is possible to see waterflowing
16.3 Installation under a counter600 mm600 mm≥ 870 mmThe appliance can be installed asfreestanding or below the kitchen counterwith correct space (see
16.5 The inlet hose20O20O45O45O• Connect the hose to the back appliance.Turn the inlet hose only left or right.• Loose the ring nut to set it in the c
• Make a U shape with the drain hose.On the edge of a sink• Make sure that the plastic guide cannotmove when the appliance drains. Attachthe guide to
To a sink spigot• Refer to the illustration. Put the drain hosein the spigot and tighten it with a clip.• Make sure that the drain hose makes aloop to
Wool 1 kgSpin Speed Maximum 1600 rpmThis product contains HFC - R134a/GWP1430 0.12 kg fluorinated gas hermetically sealed.1) Connect the water inlet
ENGLISH 47
www.aeg.com/shop132906065-A-012017
amount of detergent before being dried in the washerdryer.• Do not use the appliance if items have been soiledwith industrial chemicals.• Do not dry u
• The floor area where the appliance isto be installed must be flat, stable,heat resistant and clean.• Keep the transit bolts in a safe place.If the a
2.6 Disposal• Disconnect the appliance from themains electrical and water supplies.• Cut off the mains electrical cableclose to the appliance and disp
3.3 Accessories1 2341 SpannerTo remove the transit bolts.2 Plastic capsTo close the holes on the rear side of thecabinet after the removal of the tran
4.2 DisplayA B C DEFGHIJKThe display shows:AThe text bar:• Guides you in the use of the appliance.• Shows the programme status and phase.• Shows alarm
Comments to this Manuals