SERVICE MANUAL© AEG Hausgeräte GmbHMuggenhofer Straße 135D-90429 NürnbergGermanyFax +49 (0)911 323 1420TSE - NPubl.-Nr.:599 50 93 7968501.01ENEdition:
- 10 -TSE-N 01.01 A. B. 599 50 93 79 ENFig. Power board of top classThe power boards accommodate the components to control the heaters, hot air blower
- 11 -TSE-N 01.01 A. B. 599 50 93 79 EN1 = 5 VFig. Set value transmitter (function and temperature)Fig. Temperature controller4.6 Display of hot plate
- 12 -TSE-N 01.01 A. B. 599 50 93 79 EN4.8 Temperature sensorThe temperature in the baking oven is measured by a temperature sensor (type PT 500) fora
- 13 -TSE-N 01.01 A. B. 599 50 93 79 EN4.9 Appliances with pyrolysis4.9.1 Door lockThe appliances with pyrolytic self-cleaning system are provided wit
- 14 -TSE-N 01.01 A. B. 599 50 93 79 ENFig. Door lock in unlocked state2 – E Inlet unlocking 4 – Inlet lock3 – Phase (230 V) 33/34 – Switch contacts (
- 15 -TSE-N 01.01 A. B. 599 50 93 79 EN4.9.2 Micro switch for telescopic runnerThe appliances with pyrolytic self-cleaning system are provided with a
- 16 -TSE-N 01.01 A. B. 599 50 93 79 EN5. Operation of the setting and operating units5.1 Setting/modifying the time5.1.1 Setting/modifying the timeS
- 17 -TSE-N 01.01 A. B. 599 50 93 79 EN2. Set the current time at the keys + or - .3. Wait for 5 seconds.Flashing stops and the set time is displayed.
- 18 -TSE-N 01.01 A. B. 599 50 93 79 ENWhen this time is elapsed, CONTINUOUS flashes, anacoustic signal is given and the baking oven switches off5. Pr
- 19 -TSE-N 01.01 A. B. 599 50 93 79 ENCombined period and end1. Select baking oven function and temperature.2. Set the time required for cooking the
- 2 -TSE-N 01.01 A. B. 599 50 93 79 ENTable of contents1. General features ...
- 20 -TSE-N 01.01 A. B. 599 50 93 79 EN5.1.3 Short time1. Press the clock function key selection V until theSHORT TIME flashes.2. Set the desired shor
- 21 -TSE-N 01.01 A. B. 599 50 93 79 EN5.2 Setting the functions of the baking oven5.2.1 Switching on the baking oven function1. Switch on device at m
- 22 -TSE-N 01.01 A. B. 599 50 93 79 EN5.2.5 Switching ON/OFF of lighting system of baking oven1. Switch on the appliance at the main key.2. Press sel
- 23 -TSE-N 01.01 A. B. 599 50 93 79 ENSwitching on the childproof lock1. If necessary, switch on the appliance with themain switch.2. Press and keep
- 24 -TSE-N 01.01 A. B. 599 50 93 79 EN6. Technical equipment6.1 Fan running on functionThe appliances switch on automatically as soon as the baking o
- 25 -TSE-N 01.01 A. B. 599 50 93 79 EN6.2 PyrolysisFig. Heating up curve temperature/timeP1: Heating time 150 min = pyrolysis 1P2: Heating time 90 mi
- 26 -TSE-N 01.01 A. B. 599 50 93 79 EN6.3 Measures to prevent wrong electrical connectionIf a range with pyrolytic self-cleaning system is connected
- 27 -TSE-N 01.01 A. B. 599 50 93 79 EN6.5 Safety switching off of hot platesThe hot plates switch off automatically after:- 6 hours for heating stage
- 28 -TSE-N 01.01 A. B. 599 50 93 79 EN7.2 Measuring the temperature sensorIf a failure at the temperature sensor is assumed, the resistance can be ch
- 29 -TSE-N 01.01 A. B. 599 50 93 79 ENP876210P8762105437.3 Test and demo mode of door lockDescription of keysTop classComfort class7.3.1 Test of door
- 3 -TSE-N 01.01 A. B. 599 50 93 79 EN7. Fault diagnosis/What to do if …? ...
- 30 -TSE-N 02.01 A. B. 599 50 93 79 EN7.3.2 Demo modeActivating demo mode1. Switch on appliance (main switch P8 on)2. Press keys P1, P2, P6 and P7 s
- 31 -TSE-N 01.01 A. B. 599 50 93 79 EN8. Wiring diagramsFig. Power board of comfort-input1stPT500 temperature sensor 12nd PT500 temperature sensor 2M
- 32 -TSE-N 01.01 A. B. 599 50 93 79 ENFig. Power board top-input1stPT500 temperature sensor 12nd PT500 temperature sensor 2Meat probe meat thermomet
- 33 -TSE-N 01.01 A. B. 599 50 93 79 ENFig. Power board top-outputMain supplySwitched phasef2: thermal protection (Klixon)for the whole appliance to a
- 34 -TSE-N 01.01 A. B. 599 50 93 79 ENFig. Power board of hot plate – outputHob areaHeating element N°1/N°2/N°3/N°4 of the hot plateResidual heat ind
- 35 -TSE-N 01.01 A. B. 599 50 93 79 ENFig. Power board hot plates – inputKnob 1/2/3/4HOB heatingT° selectorMaster switchExternal bridge for induction
- 36 -TSE-N 01.01 A. B. 599 50 93 79 EN9. Service tips9.1 Unhinging and dismantling the baking ovendoorUnhinging the baking oven door1. Open the door
- 37 -TSE-N 01.01 A. B. 599 50 93 79 ENDemounting the middle door glass1. Hold middle glass pane at its lower edge and push ittowards the baking oven
- 38 -TSE-N 01.01 A. B. 599 50 93 79 EN9.2 Removing the two-part housing cover1. Loosen the two right and left mountingbolts2. Lift front half of cove
- 39 -TSE-N 01.01 A. B. 599 50 93 79 EN9.3 Demounting the electronic system, controls and displays3. Remove switch panel which is fixed at theright an
- 4 -TSE-N 01.01 A. B. 599 50 93 79 EN2. Appliance data2.1 DimensionsHeight Width Depth595mm 592mm 544mm1. General features1.1 Model designationsBuilt
- 40 -TSE-N 01.01 A. B. 599 50 93 79 EN4. Tilt panel to the front.5. Remove front frame.Attention: Latching hooks can easilybreak.6. Loosen both top e
- 41 -TSE-N 01.01 A. B. 599 50 93 79 EN8. Remove cables and then the electronicsystem.9.3.2 Demounting the 7 segment display of thehot plates1. Press
- 42 -TSE-N 01.01 A. B. 599 50 93 79 EN9.3.3 Demounting the set value transmitter ofthe hot plates.1. Loosen the mounting bolts.2. Remove the set valu
- 43 -TSE-N 01.01 A. B. 599 50 93 79 EN9.4 Demounting the temperature sensorLoosen both mounting bolts and withdrawthe temperature sensor.
- 44 -TSE-N 01.01 A. B. 599 50 93 79 EN9.5 Demounting the door lockThe door lock is arranged in the ranges at thefront left side. It is accessible fro
- 45 -TSE-N 01.01 A. B. 599 50 93 79 EN9.6 Demounting the hot air motor1. Loosen the mounting bolts at the rearwall of the baking oven.2. Loosen the m
- 46 -TSE-N 01.01 A. B. 599 50 93 79 EN4. Bend the engaging nose upwards at thecross beam.5. Loosen the bayonet catch by turning themotor anti-clockwi
- 47 -TSE-N 01.01 A. B. 599 50 93 79 EN9.7 Demounting the cross flow fan1. Loosen the bolts of the rear cover half.2. Loosen the mounting bolts.3. Rem
- 48 -TSE-N 01.01 A. B. 599 50 93 79 ENThe cake collapses (becomes sticky, soggy, water stripes) Check recipe, use less liquid, observe agitation time
- 5 -TSE-N 01.01 A. B. 599 50 93 79 EN2.2 Outputs and secondary consumersAppliance with 4 resistance elements, controlled via Prisma Basic Electronics
- 6 -TSE-N 01.01 A. B. 599 50 93 79 ENattention: a) at oven function G heating elements and cooking fan are driven alternatelyb) Fast heating active w
- 7 -TSE-N 01.01 A. B. 599 50 93 79 ENattention: a) at oven function G heating elements and cooking fan are driven alternatelyb) at oven function P he
- 8 -TSE-N 01.01 A. B. 599 50 93 79 EN3. Controls3.1 Version with maximal equipment2.3 Parboiling timesSwitch position: Parboiling time of automatic p
- 9 -TSE-N 01.01 A. B. 599 50 93 79 EN4. Component data4.1 Interface (input – electronic display system) comfort classFig. Interface comfort classThe
Comments to this Manuals