Aeg KS8100001M User Manual download pdf (Page 15)

8.2 Setting the clock functions

• Before you use the

functions: Duration, End

Time, you must set a

heating function and

temperature first. The

appliance deactivates

automatically.

• You can use the

functions: Duration and

End Time at the same

time if you want to

automatically activate

and deactivate the

appliance on a given time

later.

• The functions: Duration

and End Time do not

work when you use the

core temperature sensor.

1. Set a heating function.

2. Press again and again until the

display shows the necessary clock

function and the related symbol.

3. Press

or to set the necessary

time.

4. Press

to confirm.

When the time ends, an acoustic signal

sounds. The appliance deactivates. The

display shows a message.

5. Press a sensor field to stop the

signal.

8.3 Heat + Hold

Conditions for the function:

• The set temperature is more than 80

°C.

• The function: Duration is set.

The function: Heat + Hold keeps

prepared food warm at 80 °C for 30

minutes. It activates after the baking or

roasting procedure ends.

You can activate or deactivate the

function in the menu: Basic Settings.

1. Activate the appliance.

2. Select the heating function.

3. Set the temperature above 80 °C.

4. Press

again and again until the

display shows: Heat + Hold.

5. Press

to confirm.

When the function ends, an acoustic

signal sounds.

The function stays on if you change the

heating functions.

8.4 Extra Time

The function: Extra Time makes the

heating function continue after the end

of Duration.

Applicable to all heating

functions with Duration or

Weight Automatic. Not

applicable to heating

functions with the core

temperature sensor.

1. When the cooking time ends, an

acoustic signal sounds. Press a

sensor field.

The display shows the message.

2. Press

to activate or to

cancel.

3. Set the length of the function.

4. Press .

9.

AUTOMATIC PROGRAMMES

WARNING!

Refer to Safety chapters.

ENGLISH 15

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 47 48

Comments to this Manuals

No comments