Aeg KS8100001M User Manual Page 4

  • Download
  • Add to my manuals
  • Print
  • Page
    / 52
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 3
scratch the surface, which may result in shattering of
the glass.
Only use the core temperature sensor recommended
for this appliance.
To remove the shelf supports first pull the front of the
shelf support and then the rear end away from the
side walls. Install the shelf supports in the opposite
sequence.
2.
SAFETY INSTRUCTIONS
2.1 Installation
WARNING!
Only a qualified person must in-
stall this appliance.
Remove all the packaging.
Do not install or use a damaged appli-
ance.
Obey the installation instruction sup-
plied with the appliance.
Always be careful when you move the
appliance because it is heavy. Always
wear safety gloves.
Do not pull the appliance by the han-
dle.
Keep the minimum distance from the
other appliances and units.
Make sure that the appliance is instal-
led below and adjacent safe struc-
tures.
The sides of the appliance must stay
adjacent to appliances or to units with
the same height.
Electrical connection
WARNING!
Risk of fire and electrical shock.
All electrical connections should be
made by a qualified electrician.
The appliance must be earthed.
Make sure that the electrical informa-
tion on the rating plate agrees with
the power supply. If not, contact an
electrician.
Always use a correctly installed shock-
proof socket.
Do not use multi-plug adapters and
extension cables.
Make sure not to cause damage to the
mains plug and to the mains cable.
Contact the Service or an electrician to
change a damaged mains cable.
Do not let mains cables to come in
touch with the appliance door, spe-
cially when the door is hot.
The shock protection of live and insu-
lated parts must be fastened in such a
way that it cannot be removed without
tools.
Connect the mains plug to the mains
socket only at the end of the installa-
tion. Make sure that there is access to
the mains plug after the installation.
If the mains socket is loose, do not
connect the mains plug.
Do not pull the mains cable to discon-
nect the appliance. Always pull the
mains plug.
Use only correct isolation devices: line
protecting cut-outs, fuses (screw type
fuses removed from the holder), earth
leakage trips and contactors.
The electrical installation must have an
isolation device which lets you discon-
nect the appliance from the mains at
all poles. The isolation device must
have a contact opening width of mini-
mum 3 mm.
4
www.aeg.com
Page view 3
1 2 3 4 5 6 7 8 9 ... 51 52

Comments to this Manuals

No comments