AEG FFB41600ZM User Manual

USER MANUALEN User ManualDishwasherFFB41600ZWFFB41600ZM

German de-grees (°dH)French degrees(°fH)mmol/l Clarke de-greesWater softener lev-el23 - 28 40 - 50 4.0 - 5.0 28 - 35 619 - 22 33 - 39 3.3 - 3.9 23 - 2

6.4 AirDryAirDry improves the drying results withless energy consumption.During the drying phase, thedoor opens automaticallyand remains ajar.CAUTION!

Every time isactivated, XtraDry is off andneeds to be chosenmanually.How to activate XtraDryPress Option until the indicator is on.The display sho

CAUTION!Water and salt can come outof the salt container whenyou fill it. After you fill thesalt container, immediatelystart a programme toprevent cor

9.1 Using the detergent3020A BDC2030BA DCCAUTION!Only use detergentspecifically designed fordishwashers.1. Press the release button (B) to openthe lid

If the door is opened formore than 30 secondsduring the drying phase, therunning programme ends. Itdoes not happen if the dooris opened by AirDryfunct

10.3 What to do if you want tostop using multi-tabletsBefore you start to use separatelydetergent, salt and rinse aid do thefollowing procedure.1. Set

CBA1. Turn the filter (B) counterclockwiseand remove it.2. Remove the filter (C) out of filter (B). 3. Remove the flat filter (A).4. Wash the filters.

11.2 Cleaning the spray armsDo not remove the spray arms. If theholes in the spray arms are clogged,remove remaining parts of soil with a thinpointed

Problem and alarm code Possible cause and solutionThe appliance does not fillwith water.The display shows or .• Make sure that the water tap is open

CONTENTS1. SAFETY INFORMATION...22. SAFETY INSTRUCTIONS...

Refer to "Before first use", "Daily use", or "Hints andtips" for other possiblecauses.Once you have checked the applianc

Problem Possible cause and solutionTraces of rust on cutlery. • There is too much salt in the water used for washing.Refer to "The water softener

Capacity Place settings 13Power consumption Left-on mode (W) 5.0Off-mode (W) 0.501) Refer to the rating plate for other values.2) If the hot water com

ENHazardous substancesParts Name Pb Hg Cd Cr6+ PBBs PBDEsCabinetXTubSump & hydraulics (including pumps, heater & sensors)XSoftener & inner

www.aeg.com/shop156928960-A-092018

manufacturer is not responsible for any injuries ordamages that are the result of incorrect installation orusage. Always keep the instructions in a sa

• If the supply cord is damaged, it must be replaced bythe manufacturer, its Authorised Service Centre orsimilarly qualified persons in order to avoid

fuse, use only a 13 A ASTA (BS 1362)fuse.2.3 Water connection• Do not cause damage to the waterhoses.• Before connection to new pipes,pipes not used f

3. PRODUCT DESCRIPTION54810 9 116712 2311Worktop2Upper spray arm3Lower spray arm4Filters5Rating plate6Salt container7Air vent8Rinse aid dispenser9Dete

4. CONTROL PANEL12 4 568371On/off button2Program button3Programme indicators4Display5Delay button6Option button7Indicators8Start button4.1 IndicatorsI

Indicator DescriptionExtraHygiene indicator.Door indicator. It comes on when the appliance door is open or is not cor-rectly closed.5. PROGRAMMESProgr

5.2 Information for testinstitutesTo receive the necessary information forconducting performance tests (e.g.according to EN60436), send an email to:in